solutions
Fabrication
Fabrication Specifications
- Pressure Vessels and Heat Exchangers
- ASME VIII Division 1 and 2. Rules for the construction of Pressure Vessels
- AS 1210. Specification for Pressure Vessels
- PD 5500. Specification for unfired pressure vessels
- TEMA. Standards of the Tubular Exchanger Manufacturers Association
- API 661. Air Cooled Heat Exchangers
- ASME PVHO. Safety Standards for Pressure Vessels for Human Occupancy
- Boilers
- ASME I. Rules for the construction of power boilers
- AS 1228. Pressure Equipment-Boilers
- BS EN 12952-2. Water tube boilers and auxiliary installations
- Piping
- ASME B31.1. Power Piping
- ASME B31.3. Process Piping
- ASME B31.4. Pipeline Transportation Systems for Liquids and Slurries
- ASME B31.5. Refrigeration Piping
- ASME B31.12. Hydrogen Piping
- ASME BPE. Bioprocessing Equipment
- AS 4041. Pressure Piping
- AS/NZS 2885. Pipelines – Gas and Liquid Petroleum.
- Tanks
- API 650. Welded Tanks for Oil Storage
- API 653. Tank Inspection, Repair, Alteration and Reconstruction
- AS 1692. Steel tanks for flammable and combustible liquids.
- Structural Steel
- NZS 3404. Steel Structures
- AS/NZS 5131. Structural Steelwork Fabrication and Erection
- AWS D1.1. Structural Welding Code
Facility Capability Information
- Located New, Plymouth, Taranaki (9 km from Port Taranaki)
- 5000m² of covered workshops
- Covered assembly pad (up to 2,000 tonne capacity) for construction of modules
- 6 gantry cranes ranging in sizes from 5 tonne to 16 tonne
- Full blast & paint facility with extensive laydown areas and storage yards.
- Heat treatment furnace
- Large scale fabrication capabilities across all mechanical disciplines including piping, skids, vessels and heat exchangers
- Expertise in the use of carbon steels, chrome moly, aluminium, duplex and SAF, clad plate, stainless steels and exotics
- Located Brisbane, Queensland (7km from the Port of Brisbane)
- Undercover fabrication area 3000 sqm
- 2 x 4 ton overhead gantry cranes – 4.5m height
- Fabrication of and retubing / repairs of fin-fan & tube Bundles
- Fabrication of tanks up to 150kL, piping up to 750nB, complete skids up to 15 ton
- Welding processes GTAW/SMAW/GMAW/FCAW/STT
- Carbon & stainless steels
- Hydro testing to 400 barg
3 Fabrication Workshops
- Nilai
- Built on a 5.4-acre ( 22,000 m2 ) site
- Production facilities include two workshop bays, each 92m long x 18m wide x 13m high, a warehouse, and a paved area of 9,300 m2 which may be used for open fabrication, lay-down and other purposes.
- Production capacity for maximum output of vessels, structures, piping’s is approximately 400 metric tons per month on a single shift
- OMJ
- Built on a 2.5-acre site within the Tebrau Industrial Estate at Johor Bahru. This workshop facility is 25km from the 2nd-link crossing and 16km from the causeway to Singapore and its port. It is connected via the Pasir Gudang highway to the Tanjong Pelepas Port and the Johor Port.
- Production facilities include two workshop bays, each 90m long x 18m wide x 10.5m high. An additional paved area of 4,000 m2 is available for open fabrication, lay-down and other purposes.
- Production capacity for maximum output of vessels, structures, pipings is approximately 250 tons per month on a single shift.
- Kertih
- Sits on a 10.8-acre ( 43,700 m2 ) site fronting the Kuantan-Terengganu main trunk road and is within close proximity to the Kertih Integrated Petroleum Complex.
- Production facilities include two bays of fabrication workshops with a total area of 2550 m2, one mechanical workshop of 300 m2, one covered warehouse of 430 m2 and an office building of 300 m2. An additional paved area of approximately 30,000 m2 is available for open fabrication, lay-down and other purposes.
- Production capacity for maximum output of vessels, structures, pipings is approximately 250 tons per month on a single shift.
